2Pcs Angle Grinder to Straight Grinder Conversion Chuck Set (3 mm & 6 mm) | Model 100 Angle Grinder to Straight Grinder Conversion Kit | M10 Thread

Are you still struggling with precision carving, grinding the inside of holes, or working in tight spaces? This angle grinder-to-straight grinder conversion chuck is an essential upgrade for your toolbox! With just a simple installation, you can instantly transform your existing Model 100 angle grinder (M10×1.5 thread) into a versatile straight grinder, effortlessly handling all kinds of precision grinding, polishing, carving, and cutting tasks.

Say goodbye to the high cost of buying multiple tools and unlock the full potential of your angle grinder!

✨  Key Features 
🔄 Easy Conversion, One Tool for Multiple Uses
Designed specifically for the Model 100 angle grinder with a standard M10×1.5 thread, it replaces the original clamping plate for immediate use. Transform your idle angle grinder into a versatile straight grinder to meet a wide range of work requirements.

📏 Two Sizes Available, Wide Compatibility
Offers two collet sizes—3mm and 6mm (this set includes both)—for a perfect fit with the vast majority of electric grinder accessories on the market (such as flap discs, diamond grinding bits, wool wheels, cutting discs, and more).

💪 Reinforced Material, Sturdy and Durable
Precision-engineered from high-quality metal with a rust-resistant finish. The extended design (total length 50 mm) gives you greater flexibility when working in deep holes or tight spaces.

⚙️ Precision Clamping, Power Transmission
The precision chuck design ensures the grinding head stays securely in place without slipping, effectively transmitting the angle grinder’s powerful torque to double your grinding efficiency.

📦 Product Specifications
Product Name: Angle Grinder to Straight Grinder Adapter

Compatible Models: Model 100 Angle Grinder (Universal M10*1.5 Thread)

Adapter Sizes: 3mm (1/8“) & 6mm (1/4”)

Total Length: 50mm

Net Weight: 0.066 kg

Set Includes:

1 x 3 mm Adapter Chuck

1 x 6 mm Adapter Chuck

(Note: The angle grinder and grinding heads shown in the image are not included; only the adapter accessories are sold.)

🛠️ Installation & Usage Guide
Remove the Original Clamping Plate: Use the angle grinder’s original wrench to remove the clamping plate and nut from the angle grinder’s spindle.

Install the Adapter Chuck: Screw this product directly onto the angle grinder’s spindle (M10*1.5 thread). Recommendation: For greater stability, install the angle grinder’s original lower clamping plate in combination with the adapter (see detailed diagram).

Insert the Grinding Wheel: Insert a grinding wheel with a 3mm or 6mm shank diameter into the corresponding chuck hole.

Tighten the Chuck: Use a wrench to tighten the locking nut on the chuck to ensure the grinding wheel is securely fastened.

No-Load Test: Start the angle grinder and perform a brief no-load test.

⚠️ Important Safety Notice & Disclaimer
Please be sure to read the following carefully to ensure safe use:

Non-standard modification: This product is a modified extension accessory and is not an original factory part. After installing the extension, slight wobbling or vibration during machine operation is a normal result of the modification due to concentricity errors.

Idle test required: After installing the grinding wheel and collet, be sure to tighten them securely before performing an idle test. Only proceed with actual grinding operations after confirming that the unit operates stably and without severe wobbling.

Safety Precautions: When using this product, be sure to wear safety goggles, a dust mask, and protective gloves. Never exceed the rated speed of the angle grinder or grinding head.

Disclaimer: This store assumes no liability for any personal injury or property damage resulting from improper operation or failure to perform the no-load test as instructed. Please operate with caution—safety first!