This is a Jtron 42BYGHW609 1.68A Two Phases 4-Line Hybrid Stepper Motor for 3D Printer we highly recommend today. It will rotate when voltage is applied to their terminals. This stepper motor effectively has multiple electromagnets arranged around a central gear-shaped piece of iron. Besides, the torque curve may be extended by using current limiting drivers and increasing the driving voltage Altogether, this is a simple, but very powerful stepper motor with a 2-phase and 4-wire cable attached. Don¡ät miss out!
Features
- High start speed
- Offline command input terminal
- High holding torque at high speed
- Average current control, 2-phase sinusoidal output current drive
- A stepper motor is an electric motor that is able to create sharp movements
- It is widely used in 3D printer, precision telescope, pick and place machines, linear actuators etc.
Specifications
| Model |
42BYGHW609 |
| Motor Length |
40mm |
| Diameter of Axle |
5mm |
| The Front Shaft Length |
24mm |
| Outgoing Line |
300mm |
| Step Angle |
1.8¡ã |
| Rate Voltage |
3.4V |
| Rate Current |
1.68A |
| Phase Resistance |
1.65¦¸ |
| Phase Inductance |
3.2mH |
| Holding Torque |
3.6kg.cm |
| Lead Wire |
4 |
| Step Accurency |
¡À5% |
| Temperature Rise |
80¡æ Max. |
| Ambient Temperature Range |
20¡æ ~+50¡æ |
| Insulation Resistance |
100M¦¸ Min.50V DC |
| Dielectric Strength |
500V AC 1minute |
| Dimensions |
(1.65 x 1.65 x 1.57)" / (4.2 x 4.2 x 4)cm (L x W x H) |
| Weight |
9.88oz / 280g |
Package Includes
