500m Control Distance 433MHz RF Copy Remote Control Duplicator for Garage Door Clone Function Transmitter

4-channel design
●The 4-button design is suitable for remote controls with multiple types of functions. Each button can be individually copied to the corresponding button function of the original remote control.
Products can be used in homes, farms, factories, offices, laboratories, supermarkets and so on.
Remote control garage door \  Electric door \ house door \ shutter door \ expansion door \ gate door \ road gate
Remote control Electric curtain \ Water pump \ Fan \ Lamp \ LED light \ bulb \ ventilation device \ Signal transmission
Remote control motor positive and negative rotation \  motor switch \ DIY

Application: Garage, Light, Automated curtains, Fan, Door, Gate, LED, Lamps, Motor
Support Chip Encoding: FP527, HT600, HT680, HT6207, HT6010, HT6012, HT6013, HT6014, HT12D, HT46F49E, PIC16F630
Brand Models Supported: ALLMATIC-AEMX1, ALLMATIC-AEMX2, ALLMATIC-AEMX4; ALUTECHAT-4; BENINCA LO.T2WK, BENINCA LO.T4WK, BENINCATO.GO2WK, BENINCATO.G; DEA433-1(237), DEA433-1(238), DEAGENIE, DEAGT2M/4M, DEAMIOTD2/TD4; DOORHANTRANSMITTER-2/4; NICE-FL01/FL02S, NICE-FL04;

Parameters
RF frequency : 433.92MHz
Product Type: Copying/Duplicating Remote Control Transmitter.
Match Code Way: Copying while attached to another remote control (One to One Copying).
Channel Supported: 4 Channel.
Encoding Type: Learning Code (Example: 1527), Fixed Code (Example: 2262).Rolling code (some brands and models)
Modulation System: ASK.
Operating Current:<25mA.
Transmission Power: +13dbm.
Support encoding : A lot of code
Transmitting range : Open space is more than 500 meters

Battery:27A 12V(include) 
Size:90*40*14mm
 
  

Programming

▶ Delete Memory
Press and Hold "A" and "B" buttons at the same time until the LED indicator flashes. ssucceed.
▶Clone your original remote
1. Put both remotes into "back to back" position. Make sure they have direct contact. Or the two remote controls should be placed as closely as possible( put the two remote controls on the desktop side by side with zero distance)
2. Press and hold one button on your original remote , and then press and hold one button on your clone remote. Keep holding until LED will make 2 blinks( Note: LED 2 blinks not to release button) Then 3 blinks then into steady and you have successfully cloned. ( each buttons follow the same above operation)

Note:
**If your original remote control is a rolling code remote control,after clone remote control copy the above rolling code remote control, it needs to be matched with the original receiver. (Match Method: Contact the original receiver manufacturer)
**If the copying is unsuccessful, delete the remote control memory and copy again.

Easy Copying Process:Simple to clone, allowing you to replicate your original remote effortlessly.
Universal Compatibility:Copies a wide range of fixed code and learning code remotes, simplifying setup.
Copy Remote Control|How To Copy Remote Control|High Transmission Range:Boasts a control distance of over 50m, ensuring reliable operation from a distance.
Comprehensive Support:Supports numerous chip encodings and brand models, catering to diverse needs.
Versatile Use:Ideal for garage doors, lights, curtains, and more, enhancing home automation.

Note:
There are roughly three types of remote controllers on the market: fixed code remote controls, learning code remote controls, and rolling code remote controls.
Our copy remote control can cover most fixed code and learning code remote controls, and can cover some rolling code remote controls (specific models are listed below).

Before buying:
Dear customer, thank you for visiting our store.
If your remote control is a fixed code remote control or a learning code remote control, please make sure your original remote control meets the following conditions:
1 . The original remote control is good and can be used normally.
2 . The frequency is 433.92 MHz.
3 . The chip code is one of the following codes:
●1527 (all models), 2260 (all models), 2262 (all models), 527 (all models), 2240 (all models). For example: EV1527, SC2262, HS2262....
●SMC5326, SMC918,SMC926, SM5028S,SC5262,SCL2240, PT2240, PT2264..
●HT12E,HT12D,HT600,HT680,HT6207,HT6010,HT6012,HT6014,HT6P20B, HT6P20D, HT46F49E..
●LX2240,LX2241..
●AX5026,AX5326-3,AX5326-4..
●FP527,  PIC16F630

How to determine the frequency and chip code of your original remote control:
For example: If 433 is found, the frequency is 433Mhz. If 1527 can be found, then it matches the range of chip codes. Then this remote control can be copied by our remote control.

!!NOTE:If your chip code cannot be found above or your remote control is a rolling code remote control,
You need to make sure your remote is one of the following brand models